Description
Sony FHZ101L Laser Projector
- 10000 lumens
- FULL HD
- HDBaseT
- Laser - up to 20000 Lamp Hours.
- 360 degree installation
- Vertical & Horizontal Keystone and Lens Shift
Display system
Display system
3 LCD system
Display device
Size of effective display area
1” x 3 BrightEra LCD Panel, Aspect ratio: 16:10
Number of pixels
6,912,000 (1920 x 1200 x 3) pixels
Aspect ratio
16:10
Resolution
WUXGA (1920 x 1200 pixels)
Projection lens
Focus
Powered/Manual(Depend on lens)
Zoom - Powered/Manual
Powered/Manual(Depend on lens)
Zoom - Ratio
Depend on Lens
Throw ratio
Depend on Lens
Lens shift - Powered/Manual
Powered
Lens shift - Range Vertical/Horizontal
Range Vertical: Depend on Lens
Range Horizontal: Depend on Lens
Range Horizontal: Depend on Lens
Light source
Type
Laser diode
Filter replacement cycle (Max.)
Filter replacement cycle (Max.)
10,000 H (service maintenance)
Screen size
Screen size
Depend on Lens
Light output *1
Mode: Standard
10,000lm *2 / 10,400lm (Center)*3
Mode: Middle
8,800lm
Mode: Low
7,700lm
Colour light output *1
Mode: Standard
10,000lm
Mode: Middle
8,800lm
Mode: Low
7,700lm
Contrast ratio *1
Contrast ratio (full white / full black)
Contrast ratio (full white / full black) : ∞ : 1
Displayable scanning frequency
Horizontal
15 kHz to 92 kHz
Vertical
48 Hz to 92 Hz
Accepted signal resolution
Computer signal input
Maximum signal resolution: 1920 x 1200
Video signal input
480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i
The following items are available for digital signal only; 1080/60P, 1080/50p, 1080/24p, 1080/30p *4
The following items are available for digital signal only; 1080/60P, 1080/50p, 1080/24p, 1080/30p *4
Keystone correction (Max.)
Horizontal
+/- 30 degrees
Vertical
+/- 30 degrees
INPUT OUTPUT (Computer/Video/Audio/Control)
INPUT A
RGB / Y PB PR input connector: 5 BNC (female)
INPUT B
RGB input connector: Mini D-sub 15-pin (female)
INPUT C
DVI input connector: DVI-D 24-pin (single link), HDCP support
HDCP: v1.4
HDCP: v1.4
INPUT D
HDMI input connector: HDMI 19-pin, HDCP support
HDCP: v1.4
HDCP: v1.4
INPUT E
HDBaseT interface connector: RJ45, 3 play
INPUT F
Optional adaptor slot for 3G-SDI Input Adaptor (BKM-PJ20)
INPUT G
HTML Viewer
OUTPUT 1
Monitor output for Input A/Input B Connector: Mini D-sub 15-pin (female)
USB-1
Type-A x 1
USB-2
Type-B x 1 (for service)
REMOTE
D-sub9pin male/RS232C
LAN
RJ45, 10BASE-T/100BASE-TX/1000BASE-T
Acoustic Noise *1
Light output mode: Standard
39dB
Light output mode: Middle
39dB
Operating temperature / Operating humidity
Operating temperature / Operating humidity
0°C to 45°C (32°F to 109°F) / 20% to 80% (no condensation)
Storage temperature / Storage humidity
Storage temperature / Storage humidity
-10°C to +60°C (14°F to +140°F) / 20% to 80% (no condensation)
Power requirements
Power requirements
AC 100 V to 240 V, 8.4 A to 3.4 A, 50 Hz / 60 Hz
Power consumption
AC 100 V to 120 V
840 W
AC 220 V to 240 V
814 W
Power Consumption (Standby Mode)
AC 100 V to 120 V
0.50W (when “Standby mode” is set to “Low”）
AC 220 V to 240 V
0.50W (when “Standby mode” is set to “Low”）
Power Consumption (Networked Standby Mode)
AC 100 V to 120 V
21.6W (LAN)
26.5W (HDBT)
26.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
26.5W (HDBT)
26.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
AC 220 V to 240 V
21.3W (LAN)
26.5W (HDBT)
26.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
26.5W (HDBT)
26.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
Standby Mode / Networked Standby Mode Activated
Standby Mode / Networked Standby Mode Activated
Approx. 2 Minutes
Heat dissipation
AC 100 V to 120 V
2866 BTU/h
AC 220 V to 240 V
2777 BTU/h
Dimensions (W x H x D) (without protrusions)
Dimensions (W x H x D) (without protrusions)
Approx. 544 x 205 x 564 mm
(21 13/32 x 8 1/16 x 22 7/32 inches)
(21 13/32 x 8 1/16 x 22 7/32 inches)
Mass
Mass
Approx. 26 kg (58 lb)
Supplied accessories
Remote commander
RM-PJ30
Projection Lens
Projection Lens
VPLL-Z4107, 4008, Z4111, Z4015, Z4019, Z4025, Z4045
Optional Projection Lens
VPLL-Z4107
Throw Ratio: 0:75:1 to 0:94:1
Lens Shift - Range Vertical: +/-50%
Lens Shift - Range Horizontal: +/-24%
Lens Shift - Range Vertical: +/-50%
Lens Shift - Range Horizontal: +/-24%
VPLL-4008
Throw Ratio: 1:00:1
Lens Shift - Range Vertical: +/-32%
Lens Shift - Range Horizontal: +/-15%
Lens Shift - Range Vertical: +/-32%
Lens Shift - Range Horizontal: +/-15%
VPLL-Z4111
Throw Ratio: 1:30:1 to 1:96:1
Lens Shift - Range Vertical: +/-99%
Lens Shift - Range Horizontal: +/-51%
Lens Shift - Range Vertical: +/-99%
Lens Shift - Range Horizontal: +/-51%
VPLL-Z4015
Throw Ratio: 1:85:1 to 2:44:1
Lens Shift - Range Vertical: +/-98%
Lens Shift - Range Horizontal: +/-51%
Lens Shift - Range Vertical: +/-98%
Lens Shift - Range Horizontal: +/-51%
VPLL-Z4019
Throw Ratio: 2:41:1 to 3:07:1
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
VPLL-Z4025
Throw Ratio: 3:02:1 to 5:58:1
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
VPLL-Z4045
Throw Ratio: 5.56:1 to 7.5:1
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
Lens Shift - Range Vertical: +/-107%
Lens Shift - Range Horizontal: +/-57%
Notes
*1
The figures are approximate. They vary depending on the environment or how the projector is used.
*2
The value is in accordance with ISO 21118, and may differ depending on the actual unit. Brightness and contrast vary depending on use conditions and environments.
*3
The value is light output measured at center area of screen in Standard mode, and average of all products shipped.
*4
When using BKM-PJ20