Wall Mount for TV & Digital Signage Displays

Low profile fixed mount that holds the display parallel to the wall at a 25mm profile. Compact construction and simple installation suit commercial, domestic and light industrial rooms alike.

Flat flush mount that holds the screen just 24mm off the wall for the tightest possible finish. Automatic click spring locks hold the screen on the rail as soon as it is dropped into place.

The same flush mount format with a 32mm profile, giving a little more clearance behind the panel for connectors and cable runs while keeping the screen close to the wall.

Extra large flush mount with a 3mm steel wall frame for heavy commercial panels and interactive displays, holding a 100kg screen just 32mm off the wall.

Heavy duty fixed mounts for large screen displays and heavy interactive touch panels. The 91kg model covers VESA patterns to 800 x 500mm; the 150kg model handles panels to 100″ at a 39mm profile, with spacers for uneven wall surfaces.

Slim vertical tilt bracket for small displays mounted above eye level, holding the screen just 53mm off the wall. Rated well beyond the screen sizes it covers, so there is plenty of margin on heavier commercial panels.

Mid size tilt bracket with a generous -15° downward range, built for screens mounted high on a wall in bars, waiting rooms and classrooms. The 770mm rail spreads the load across the wall structure.

Extra large tilt bracket for big format panels, with a hole pattern reach of 924 x 605mm. Click spring locks and open architecture make it straightforward to land a large screen on the rail and keep air moving behind it.

Extra large tilt bracket rated to a 900 x 600mm VESA pattern, covering the widest hole spacings found on large commercial panels. Same +5°/-10° tilt and 85mm profile as the standard XL bracket.

Tilt mount with 56mm of space behind the display for media players and receivers, fixing to stud walls at 24″ spacing. A good match where the screen sits above head height and the source hardware needs to hide behind it.

The narrow stud version of the tilt mount, offsetting the display 56mm from the wall with a 15° tilt range. Designed for walls where the framing does not line up with a standard wide plate.

Heavy duty tilt mount for displays up to 91kg, with space at the rear to conceal media devices and theft resistant fixings. Suited to screens mounted high where a downward angle improves the viewing position.

Full motion articulating bracket for smaller screens, pulling the display up to 475mm off the wall and turning it ±60° left or right. Useful in kitchens, bedrooms, offices and reception desks where the viewing position moves around the room.

Dual-arm full motion mount that extends 510mm from the wall and turns ±60° either way, so one screen can serve two seating areas. Stud allowances at 450mm and 600mm suit standard Australian wall framing.

Super heavy duty articulating mount for large panels, extending 635mm from the wall with a quick lock and release system for servicing. Built for venues where a big screen has to swing to face the room.

Purpose built portrait brackets for digital signage and public display panels, with an anti-theft locking hole and open architecture for airflow behind the screen. Choose the 27mm fixed version for a flush shopfront look, or the 81mm tilting version where the panel sits high and needs to angle down.

A 360° continuous rotation mount that lets one bracket serve both landscape and portrait content - handy when the same panel changes role between sites or campaigns. The slide-in VESA plate makes attaching and detaching the screen a one person job.

Pop-out video wall bracket for tiled landscape displays, with spring assisted access to the back of each panel without dismantling the array. Precision adjustment on every axis and lateral shift brackets get the seams aligned.

A six screen video wall kit built on the same modular system, for wider arrays in retail, foyers and control rooms. Every panel adjusts after installation so the seams can be closed up on site.

A four screen video wall kit from a modular, upgradeable mounting system. Post-installation horizontal adjustment, screen levelling and wall levelling let the array be trimmed into alignment after the panels are hung.

Modular menu board system for quick service restaurants and any site where screens hang in a row over a counter. Aluminium rails join together or cut to length, so the run can be built to the exact number of screens.

Telehook ceiling mount for medium to heavy commercial displays, with 360° rotation around the pole and a drop of up to 1900mm. Portrait mounting makes it a strong option for retail and digital signage where wall space is not available.

The same Telehook ceiling mount in white, for ceilings and shopfronts where a black pole would stand out. Identical 1900mm drop, 360° pole rotation and 30° tilt.

Pre-configured floor-to-ceiling pole mount for a single display, braced top and bottom for stability. Popular in real estate windowfronts and in-store signage, most often running the panel in portrait.

Floor mounted post for a single commercial panel where there is no ceiling fixture to work with - high ceilings, glazed shopfronts and open plan retail. A 1.8m post puts the display at standing eye level.

A single display on a freestanding foot, so the screen can be wheeled into position for a promotion and moved again afterwards. The foot can also be fixed down where the signage becomes permanent.